G7 psu parts and schematic - confused

On the power supply parts list for the g7 I read

2pcs electrolytic capacitors 470uf/200v
1pcs electrolytic capacitor 2200uf/25v
1pcs electrolytic capacitor 10uf/35v
----------------------------------------------
4 capacitors

then on the schematic

2pcs 470uf/200v -accounted for
1pcs 10 - accounted for
then there are
2pcs 1000/ 35v
----------------------
5 capacitors

So do I use the 2200uf 25v in place of the 2pcs 1000/35 volt?

Patina

Just use whatever fit's on the PCB :grin:

Best regards,

Mikkel C. Simonsen

Mikkel is right..

I am glad you both answered because I wasn't sure if it was a joke.
oh yea, just put whatever fits in there.. even if its not on the parts list.. just throw something in there.

Hope I didn't waste your time with this one. No One -out of all of the countless people building the g7 asked.




I guess this must be an electronics 101 question.
patina :green: