Double ear eyelets

Does someone know, where to buy a double ear eyelets, similar the ones in the M49 microphone ?

https://fr.aliexpress.com/item/1000pcs-3-2-Inserts-Plug-Spring-Terminal-PCB-Solder-lug-type-thickness-0-3mm-Copper-washer/32709471236.html?spm=a2g0w.10010108.1000014.4.443bc76eVvhbS1&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.110450.000000000000000&scm_id=1007.13338.110450.000000000000000&scm-url=1007.13338.110450.000000000000000&pvid=5edb8c02-ac8c-4c57-a210-8c7aa9d1fa4b

Where are you located?

There is a shop in Switzerland but the shipping is really expensive to other countries... 
I would also like to buy some stuff from there but the shipping cost are holding me back.

http://shop.griederbauteile.ch/product_info.php?cPath=1360_1361&products_id=9673

www.ettinger.de

Thank you all good people 

I used "double pins" from Aliexpress and brass rivets from Ebay. It was easy with grommet tool. I drilled the inside hole of "double pins" to increase it to fit the grommets nicely.

https://www.aliexpress.com/item/1000pcs-2-2-Inserts-Plug-Spring-Terminal-PCB-Solder-lug-type-thickness-0-3mm-Copper-washer/32709100694.html?spm=a2g0s.9042311.0.0.6ad94c4dk7Qcx9

Tool for 2mm eyelets
https://www.ebay.com/itm/Leather-Crafts-Eyelet-Grommet-Setter-Tools-Anvil-Die-Set-Punch-Tool-1-5mm-40mm/332529819702?hash=item4d6c526036:m:mOALgZq4gSqfv9XM21Vd4Hw

2mm inside dia x 4mm lenght
https://www.ebay.com/itm/Solid-Brass-Eyelets-for-Leather-Craft-Grommet-Banner-1-5mm-2mm-2-5mm-3mm-3-5mm/332663879511?var=541790248368&hash=item4d744ff757:g:WzYAAOSwenlbCLvm&varId=541790248368&redirect=mobile

Nice!

Vac11 said:

I used "double pins" from Aliexpress and bras rivet from Ebay. It was easy with grommet tool.

https://www.aliexpress.com/item/1000pcs-2-2-Inserts-Plug-Spring-Terminal-PCB-Solder-lug-type-thickness-0-3mm-Copper-washer/32709100694.html?spm=a2g0s.9042311.0.0.6ad94c4dk7Qcx9

https://www.ebay.com/itm/Leather-Crafts-Eyelet-Grommet-Setter-Tools-Anvil-Die-Set-Punch-Tool-1-5mm-40mm/332529819702?hash=item4d6c526036:m:mOALgZq4gSqfv9XM21Vd4Hw

https://www.ebay.com/itm/Copper-Brass-Vias-Rivet-Nuts-Through-Hole-Rivets-Hollow-Grommets-M2-3-M2-5-M3/172325490121?var=471144053545&hash=item281f664dc9:m:m9eJoXDwwYQxw8SeivnNGjw

Click to expand...

Thanks for the info.

Otherwise very nice board. Is this plexyglass ? Did you cut it yourself ? Thanks.

Thanks. It is FR4 material (standard PCB 1.6 mm thick board). I designed this board for Oliver Archuts M49 point to point build and Banzai M49 body... Boards are from chinese PCB manufakture. Let me know if you want some pcs, I have about 8 pcs in stock...

I also have transformer boards, rubber parts (Mobys xformers compatiable) and capsule boards...

PMed...

There was some interest. Boards has been sent to everyone who contacted me. Thank you.
To Lampas: Your PM box is full, I have contacted you on your email, but no response.... Did you receive the boards?

Vac11 said:

There was some interest. Boards has been sent to everyone who contacted me. Thank you.
To Lampas: Your PM box is full, I have contacted you on your email, but no response.... Did you receive the boards?

Click to expand...

Everything OK 

It appear that something is wrong with this board ... I could count 10 messages in my Inbox but the system count 50 and 100% even If I delete a few ones ...


Thanks again!

lampas said:

It appear that something is wrong with this board ... I could count 10 messages in my Inbox but the system count 50 and 100% even If I delete a few ones ...

Click to expand...

Do you use your provider's webmail or a client app such as Outlook or Thunderbird?

abbey road d enfer said:

Do you use your provider's webmail or a client app such as Outlook or Thunderbird?

Click to expand...

No, just internal (from this board) messaging system ...


Regards.

Ok, all my boards sold. Thank you. Btw. here is final result....

Vac11 said:

Ok, all my boards sold. Thank you. Btw. here is final result....

Click to expand...

Well that is impressive work