Eagle Soft question, how to increase gap between pad and layer signal?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Olegarich

Well-known member
GDIY Supporter
Joined
Aug 30, 2012
Messages
240
Location
Vilnius_Lithuania
Hey guys,
I'm making layout of pcb in Eagle. My Top layer is ground. How do I need to increase a gap between (Top layer )ground and pads that should not be connected? Eagle does that automatically but i want to increase that gap more.[/img]
 

Attachments

  • Screen Shot 2018-09-06 at 14.06.18.png
    Screen Shot 2018-09-06 at 14.06.18.png
    210.7 KB · Views: 7
Back
Top