jensenmann

Re: Amek M2500 console bus balancing
« Reply #20 on: September 03, 2019, 04:51:38 PM »
Sorry, I´ve been busy. It will take a few more days ´til I find time to do it.
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort


ilfungo

Re: Amek M2500 console bus balancing
« Reply #21 on: September 03, 2019, 06:43:55 PM »
Thanks!

jensenmann

Re: Amek M2500 console bus balancing
« Reply #22 on: September 07, 2019, 01:21:33 PM »
Here are some pictures of the Gl122 PCB:
https://www.dropbox.com/sh/2grvimxd7ecktt9/AABYo3oJUzwA3bnNARfLtKvsa?dl=0

Both electrolytics are a bit big for the PCB. They were newly installed back when I recapped the desk. In original state there were 2x 100uF/6,3V tantalums parallel instead of the smaller 220uF electrolytic. And the other spot had a 100uF/6,3V tantalum as output coupling cap which has been replaced with a 470uF cap. The red Wimas are 0,1uF bypass caps.
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort

ilfungo

Re: Amek M2500 console bus balancing
« Reply #23 on: September 08, 2019, 07:53:11 AM »
Thanks!!!


 

Related Topics

  Subject / Started by Replies Last post
27 Replies
10156 Views
Last post November 29, 2007, 01:09:23 PM
by tonebucket
16 Replies
6583 Views
Last post January 25, 2013, 10:56:17 AM
by kato
4 Replies
4091 Views
Last post January 12, 2010, 05:42:42 PM
by sahib
6 Replies
453 Views
Last post July 04, 2019, 08:12:42 AM
by ilfungo