Help identifying old school socket terminals for 2520

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fazeka

Well-known member
Joined
Jun 3, 2004
Messages
1,186
Location
\/\//-\
This isn't the modern Mill-Max sockets I need help with...

I'm attempting to clone a solid state Pultec EQP-1A3. As you know, these used the 2520 DOA. As seen on the rear of the unit:

Qoj7UWQ.jpg


I can round up some phenolic for the board, no problem. But I need help identifying these old style terminals:

WHOKhTN.jpg


Surely someone on groupdiy can help?

Cheers,
Chris
 
They are the metal-bits out of tube-sockets.

Measure your pins and see if they are 1.02mm.

Then talk to anybody who runs lots of mini tubes. Poor socket contact is in the Top Three aggravations.
 
Considering the topic at hand does anyone also have a link to modern mill max sockets for use with 2520?
 
Back
Top