Check this patch wiring

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JAY X

Well-known member
Joined
Jan 9, 2009
Messages
683
Hi!

I want to make sure the wiring of the patchbay schematic is correct.

It shows daw outputs 1-2 normalled to the summing inputs 1-2. Ok so far, but if i want to place a processor between the daw outputs and summing inputs i have to break the normalling connections... I think it is right, but i am not sure...

Thanks for your comments!

Jay x
 

Attachments

  • PATCHBAY WIRING.jpg
    PATCHBAY WIRING.jpg
    56.5 KB · Views: 62
It's ok. You can place also comp inputs below outputs and use isolated setting in the patchbay. That way you will save two columns.
 
Hi Moamps!

Ok!. And the isolating setting is a great solution!

Thanks a lot! :)

Jay x
 

Latest posts

Back
Top