eddie_ruff_
Active member
- Joined
- Dec 19, 2016
- Messages
- 37
I want to make a preamp with a simple 3 band eq that can do broad strokes on the low, mids, and highs. I essentially took the common layout for a THAT1510 preamp and added three Sontec 250 EQ bands. I am wondering if anyone could verify the circuit design. Can I connect them together like the schematic link below? I have simulated the EQ part after the DC servo and it appears to be working well. I have also built and tested the preamp part and that works well too. But will they work together...
I do feel that I might have forgotten something. I did remove quite a few elements from the original EQ design, but the simulation is functioning great...
Be sure to click the schematic tab. Ignore the layout tab for now...
https://easyeda.com/editor#id=|6074ad256f4b4691b52041ef9e135004|605eb1a838984dc3882d61975dc0a36b
I do feel that I might have forgotten something. I did remove quite a few elements from the original EQ design, but the simulation is functioning great...
Be sure to click the schematic tab. Ignore the layout tab for now...
https://easyeda.com/editor#id=|6074ad256f4b4691b52041ef9e135004|605eb1a838984dc3882d61975dc0a36b