neve 1073 + 660 combo

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ilfungo

Well-known member
Joined
Apr 25, 2009
Messages
1,460
Location
ITALY
Hi I'm working on a 1073 pre/EQ + 660 Channelstrip.
I'm at the end of project I need just to rack inside the 660.
Only one problem regarding 1073:

When the eq go IN, the level increase of 3db...
It's normal?

The last question:
I want to have a true bypass of the single unit:
how can I configura the ralay to have:

a - 1073 only
b - 660 only
c -1073 + 660

THANKS!!!
 

Attachments

  • 1.jpg
    1.jpg
    1.7 MB · Views: 63
When the eq go IN, the level increase of 3db...
It's normal?



Solved I've used 10k trim fader instead of 5k....


The last question:
I want to have a true bypass of the single unit:
how can I configure the ralays to have:

a - 1073 only
b - 660 only
c -1073 + 660

THANKS!!!
 
The unit is near to ready, and sound fantasctic!!!
Just 2 questions:
I don't know why when the input pot of 660 is full I've a great frequency responce,
but, when it ic from half way to down there is a roll off on low frequency... Screen shot attached
Suggestions?

Neve out
from the manual I've replaced the 5.1k resistor between  k and B- with a 5k pot ( for trim out)
but when I go down with trim there is a different level between eq in and eq out ( eq totally flat)
Suggestions?

Help please.... ;D ;D
 

Attachments

  • EAR 660 Input pot Full.png
    EAR 660 Input pot Full.png
    47.1 KB · Views: 9
And this is the Frankenstein with temporary knobs...
 

Attachments

  • Neve 1073+EAR600 Combo Front.jpg
    Neve 1073+EAR600 Combo Front.jpg
    1.2 MB · Views: 29

Latest posts

Back
Top