Reamp box

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sinkia

Well-known member
Joined
Nov 10, 2013
Messages
156
Hi Folks !

I was wondering if anyone of you had a schematic / layout for a reamp box ?
I'm looking for something that convert my signal from my line out (Antelope audio converter) to guitar amp input OR to DI synth line level input..
Is any of you have some idea about that :)

Many thank !

Cheers
Adrien
 
Yep ! thanks !!!

I tjink I can handle a perfbord build :)

Is an Edcor tranny good enough for that or it's better to try an Haufe or OEM?
 
I've built that circuit and I couldn't hear any difference with the impedance pot. I've left it out in my builds.

The original Reamp used a UTC O-10 which work and sound great for guitar and bass. I can't hear a difference between the instrument straight into the amp vs. tube DI -> preamp -> DAW -> reamp -> amp

I would expect the Edcor would sound fine.

You can simplify it it and omit the level pot too potentially if you have a send level on your DAW / console.
I've built mine with no controls for simplicity.
 
Remember that transformers distort most at low frequencies and high levels so if you are reamping bass you need a good transformer if you don't want it to colour the sound.

Cheers

Ian
 

Latest posts

Back
Top