eastwoodsound
Member
- Joined
- Jun 9, 2015
- Messages
- 15
I am curious as to others “noise floor”. Primarily with analog mix set up, “faders” at unity, master at unity, back into daw or other mix recording device.
Some info to include in this informal poll is :
# of channels
Type of D/A feeding mixer
Type of A/D capturing mix
Measurement method (meter from daw or hardware? Other method? )
Type of D/A for monitoring
Grounding considerations in wiring.
I am reading -90ish with an avid hd, 16 channel summing box daw connected. Same interface capturing mix. I need to make sure of if analog master has gain in hand or not. Using a dangerous st monitor.
Rough measurement by using internal daw meter, metering input of mix return normal “digital” type pro tools meter.
Does this seem acceptable? It seems pretty dang quiet to me.
Some info to include in this informal poll is :
# of channels
Type of D/A feeding mixer
Type of A/D capturing mix
Measurement method (meter from daw or hardware? Other method? )
Type of D/A for monitoring
Grounding considerations in wiring.
I am reading -90ish with an avid hd, 16 channel summing box daw connected. Same interface capturing mix. I need to make sure of if analog master has gain in hand or not. Using a dangerous st monitor.
Rough measurement by using internal daw meter, metering input of mix return normal “digital” type pro tools meter.
Does this seem acceptable? It seems pretty dang quiet to me.