DR-NEQ3D Calibration

Has anyone ever successfully calibrated one of these EQs?

Its nice there there are REW plots provided in the build, and basic trimming instructions , but the calibration process leaves more questions than answers. 

What level should I be sending from REW to the EQ.  White noise or Pink noise? 

REW is configured right, and can see my bypass mode, flat mode, and all my pots do roughly as expected, but having some difficulty doing the last 20% to get it just right.

Thanks

Jason



My unit is working properly, and

Why don't you ask purusha? He's the one that ripped of the schematic and board design, so he should know.

First thing I did was contact him.  Said he would get back to me, but no response after a couple inquiries.