pvision
Well-known member
I have a broken pot on a Fireface. The front panel doesn't want to come off because the push release on the XLR inputs won't allow it to slide forward over the pot shafts
Logically there must be a way to remove the spring-loaded locking release tab but I can't see it. Any ideas?
The XLRs are Neutrik PCB-mount 3-pin XLRs with a metal release tab. Part number is probably NC3FAH. I can't find any useful info on the Neutrik site
https://www.neutrik.com/en/product/nc3fah
Nick Froome
Logically there must be a way to remove the spring-loaded locking release tab but I can't see it. Any ideas?
The XLRs are Neutrik PCB-mount 3-pin XLRs with a metal release tab. Part number is probably NC3FAH. I can't find any useful info on the Neutrik site
https://www.neutrik.com/en/product/nc3fah
Nick Froome