crisotop

I've acquired a couple of soldering stations over the years and selling some:

WTCP51 in Original Box: €160
https://www.dropbox.com/s/b3qenbdavqygqey/Weller_WTCP51_1.jpg?dl=0
https://www.dropbox.com/s/c6kxj4kp3nmdx4n/Weller_WTCP51_3.jpg?dl=0

WTCP51 slightly used: €130
https://www.dropbox.com/s/qcgnkr0gm8xd8gp/Weller_WTCP51_3_1.jpg?dl=0
https://www.dropbox.com/s/2xggnjomyjdb6xz/Weller_WTCP51_3_2.jpg?dl=0

WTCP S Iron w/o Tip: €50
WTCP Heater: €30 per piece
https://www.dropbox.com/s/7n7qcb4pjqufxh3/Weller_Ersatzteile.jpg?dl=0

CAD Equitek E100 Condenser Mic: SOLD

Shure Beta57a Mic: SOLD

AKG D14S: €120
good condition, high/low switch needs cleaning, I had to turn it a couple of times before I got a signal out of the mic.
https://www.dropbox.com/s/uedh54cyvuucda2/akg_d14e_01.jpg?dl=0
https://www.dropbox.com/s/uedh54cyvuucda2/akg_d14e_02.jpg?dl=0
https://www.dropbox.com/s/uedh54cyvuucda2/akg_d14e_03.jpg?dl=0

AKG D190ES: SOLD

AKG D770: €80
"the Austrian SM57", like new in box
https://www.dropbox.com/s/m9kj9sg5zu06nms/akg_D770_01.jpg?dl=0
https://www.dropbox.com/s/cu671ec5bx08o30/akg_D770_02.jpg?dl=0
https://www.dropbox.com/s/pwpa9ll5e8e2u2r/akg_D770_03.jpg?dl=0

AKG K141: €50
55Ohms; new mini-XLR and Earpads
https://www.dropbox.com/s/gpk0af63syd8ze6/AKG_K2141_1.jpg?dl=0
https://www.dropbox.com/s/qsngjj2n2a5muio/AKG_K2141_2.jpg?dl=0
https://www.dropbox.com/s/g9ylyo51puu79xq/AKG_K2141_3.jpg?dl=0
https://www.dropbox.com/s/8axcffof4hudgoz/AKG_K2141_4.jpg?dl=0

AKG K240: €50
55Ohms, good condition in original box, ear pads slightly worn
https://www.dropbox.com/s/zvdwsx8uum13b91/AKG_K240_1.jpg?dl=0
https://www.dropbox.com/s/ndkvr5930agtyt5/AKG_K240_2.jpg?dl=0
https://www.dropbox.com/s/aj1tjgot6kpfahf/AKG_K240_3.jpg?dl=0
https://www.dropbox.com/s/6ongvvtb40b655l/AKG_K240_4.jpg?dl=0
https://www.dropbox.com/s/0vn4a9g48qycuvt/AKG_K240_5.jpg?dl=0

AKG K240mk2: €50
55Ohms, good condition, ear pads slightly worn
https://www.dropbox.com/s/puec0eirjnx1izz/AKG_K240mk2_1.jpg?dl=0
https://www.dropbox.com/s/i0tm13bi1u6c6sm/AKG_K240mk2_2.jpg?dl=0
https://www.dropbox.com/s/w99ofqlzqeucr7n/AKG_K240mk2_3.jpg?dl=0
https://www.dropbox.com/s/g8nnujez0st880t/AKG_K240mk2_4.jpg?dl=0
https://www.dropbox.com/s/i7ocsllwok0ba8h/AKG_K240mk2_5.jpg?dl=0

Danelectro Cool Cat Metal Distortion: €10
Does not effect signal, only bypass works
https://www.dropbox.com/s/qp8jouya5gj4i38/Danelectro.jpg?dl=0

TAD Biasmaster: for Rent
maybe someone wants to easily measure / adjust bias on their amp
https://www.dropbox.com/s/66nfb6g5xaav6m6/tad_biasmaster.jpg?dl=0
« Last Edit: October 04, 2019, 03:01:16 AM by crisotop »


crisotop

Re: Weller WTCP51 S Soldering Stations / Spares + CAD Equitek E100
« Reply #1 on: April 01, 2019, 09:29:34 AM »
bump, someone wants a nice soldering station or condenser mic :)

crisotop

Re: Weller WTCP51 S Soldering Stations / Spares + CAD Equitek E100
« Reply #2 on: April 12, 2019, 05:17:12 AM »
bump up the irons

crisotop

Re: Weller WTCP51 S Soldering Stations / Spares + CAD Equitek E100
« Reply #3 on: May 07, 2019, 10:18:35 AM »
bumperoo

crisotop

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #4 on: June 14, 2019, 08:29:22 AM »
aaaand up

nashkato

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #5 on: June 14, 2019, 08:49:07 AM »
Hi Christoph !
Do you know if the WTCP51 iron is compatible with the older TCP-Magnastat 24V/50VA stations (which i have )
the connector seems to be different , otherwise they look the same ?
in fact i would only need the plastic handle . the screws that hold the heater element to the handle got loose.

crisotop

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #6 on: June 14, 2019, 08:58:28 AM »
Hi!

according to specs they should be compatible; the newer base station still delivers 24V and the iron is rated with 50W. It looks like there's no connector on your unit and the cable is connected via a screw-terminal?

best regards,
Christoph

nashkato

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #7 on: June 16, 2019, 08:41:05 AM »
Hi cristoph
I do have a connector , some kind of 3 pole DIN-Plug with only 2 pins connected .
Yesterday however my basestation started humming (nothing serious , just a loose screw on the transformer maybe ) but  i´m considering one of your stations .
Can you do a GDIY-friends-price with shipping in Austria ?  ;)
David

crisotop

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #8 on: July 03, 2019, 07:43:14 AM »
Beta57 Sold, rest still up for sale -- make an offer  ;)

crisotop

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #9 on: July 08, 2019, 04:34:56 AM »
D190 Sold - keep them offers coming  ;)


crisotop

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #10 on: August 06, 2019, 05:26:36 AM »
stuff still up for grabs!

crisotop

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #11 on: October 04, 2019, 03:01:39 AM »
CAD E100 sold, everything else open to offers

crisotop

Re: Weller Soldering Stations / Spares + "Vintage" Mics / Headphones
« Reply #12 on: November 04, 2019, 11:55:51 AM »
wintertime is soldering time  :)


 

Related Topics

  Subject / Started by Replies Last post
3 Replies
2855 Views
Last post June 05, 2010, 01:26:03 AM
by Andy Peters
4 Replies
1943 Views
Last post August 12, 2010, 05:44:01 PM
by Ptownkid
1 Replies
1048 Views
Last post March 07, 2011, 05:57:13 PM
by Walrus
6 Replies
1099 Views
Last post June 19, 2018, 05:09:43 AM
by ghiatorino