Simple High Pass and Low Pass Filter unit for mastering

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

weiss

Well-known member
Joined
Jun 16, 2014
Messages
1,436
Location
Germany
Hey guys,

i was wondering if anyone ever built like a hpf/lpf filter unit (like used in the bax eq for example) without any other filters involved. Preferably with switchable slope, 24/48db 6/12db (no idea if that's possible)?

Is it a complex task to build?

thanks for the input
 
john12ax7 said:
Is a super high slope that useful? Seems there would be more phase issues.

you are right, after reading some more, i gotta correct myself. probably 6 or 12 db is enough  ::)
Now i came across the harrison ford filters. seems to be most usable for what i had planned.
other ideas/experiences?

thanks  :)
 
The harrison would do the job. Although for mastering you probably want stepped switches?  So you could go even simpler, passive RC networks  with a buffer.
 
john12ax7 said:
The harrison would do the job. Although for mastering you probably want stepped switches?  So you could go even simpler, passive RC networks  with a buffer.

indeed i need switches only.
you mean something like that? how would i realize different frequencies?

LP
fil90.gif


HP
fil92.gif
 
Those are the classic Sallen Key filters that the harrsion and others are based on. If you look at schematics usually the Cs are fixed and R3 and R4 replaced by a dual pot which then varies the frequency. So just use a switch to select appropriate R values instead of a pot.

Have you seen these? Maybe it could be modded for switched operation?
https://groupdiy.com/index.php?topic=68367.0
 
john12ax7 said:
Those are the classic Sallen Key filters that the harrsion and others are based on. If you look at schematics usually the Cs are fixed and R3 and R4 replaced by a dual pot which then varies the frequency. So just use a switch to select appropriate R values instead of a pot.

Have you seen these? Maybe it could be modded for switched operation?
https://groupdiy.com/index.php?topic=68367.0

thank you! no, i haven't seen these, looking very nice!
 
I did the Harrison's with stepped switches. I never used them so sold them but I don't do nearly as much mastering as others
 
Rocinante said:
I did the Harrison's with stepped switches. I never used them so sold them but I don't do nearly as much mastering as others

nice. simple lorlins? do you remember the values used?
 
SKJGProject said:
http://www.bereich03-audio.de/mastering_filter.html

I know the Filter but i find 500€ excl. VAT way overpriced in relation to the part costs.
 
I used one of the regular contributors  calculater for rev pots (maybe Harpo or Jeff) ,and yes I used lorlins. I had to do them 3 times.
 
Back
Top