iturnknobs
Well-known member
So, I am trying to install this trafo into a KM84 circuit. I have tested primary tied together in series at 1.4Kohms. Each side of the secondary tests at 32 ohms. In order to have a 7:1 ratio I need to configure the secondary side to come up with 200 ohms as shown in the schematic from Haufe. I can come up with 32R(one side), 64R(both sides in series) or 16R(both sides in parallel). No matter what I do, I can't seem to come up with the "magical" 200R. Does anyone have any insight?