TOFT ATB-32 Console. Need DC cable plug

Hi guys.

Just got a nice used TOFT ATB-32 console, but the female DC power cable connector plug to the console is bad. Its fractured internally.

So I called PMI Audio Group, Tofts master distributor for a replacement. But they don't sell the connector only. But they will sell you an entire new 9 foot long cable for $50 plus shipping.

I'll buy it if I absolutely have to, but what a waste. So does anyone know where to get the 6 in connector that;s used on the TB series of Toft consoles?  i don't see any brand or numbers on the connector shells or even inside the connector.

Have any of you got any ideas?

Thanks!  Greg.

One good idea might be to post a picture of the connector so people know what connector you are talking about.  That way you may get some ideas where to get it from.

Check amphenol

I'll try to find some photos of the connectors. The ones I have are too disintegrated to be of any help!

I have an atb psu. It is original when they wired from the pau to the mixer with a cable grommit and connected into the mixer. If that is the end you need,  I live local to socal, we could work it out. I don't have the toft anymore and the psu I use for other things so I could let the cable go.