[volker]

Since I couldn't find an appropriate transformer for my microphone build, and after being disappointed with the offers for a custom one, I eventually decided to wind it myself. I have the laminations to do a couple more, so if anybody is interested let me know! I can do any HV/heater voltage combination, as long as the overall power is less than 10W. The one in the picture for example is wound for 160V/10mA and 12V/0,5A. AKG C12, ELA M 251 and similar stuff, no problem. The transformer will be properly vacuum impregnated.

18€ plus shipping.

[okgb]

Nice work ! sounds like it could also do a single tube preamp ?

[volker]

Sure, that should work. I'll send you a mail, I think I still have your address.

[duantro]

Hey Volker,
How large is the transformer? I’ve got an original psu for a Lomo 19a19 that has a dead power transformer, that I’d like to get working. Not sure if yours would fit? Here’s the specs:
input   voltage :    power  110VAC     
output voltage :    filament  5,9 V DC , 160 Ma 
 plate   100 V DC  ,   1 Ma   

[tony hunt]

Excellent idea. PM sent.

[Murdock]

Hey Volker,
How large is the transformer?

Yeah, would also be interested about the size.

[volker]

Here is another one I just finished, fresh out of the bath. It will go into a AC701 equipped SELA T24.




duantro: those power requirements are perfectly fine.

[tony hunt]

I really appreciate these three mic PT's that I ordered from Volker.
Turnaround was really quick.
One is for a "standard" D251 build.
The other two I specced with advice from Volker for home-brew builds of a 251 and a M49 where the PSU is to be close to the original. These both include a screens.
I hope the photo loads up because it is good clean work. 

[volker]

You're welcome Tony! Hope to see more of your cool builds once you're finished!

[panman]

I also ordered two trannies for Gefell N61. Excellent work from Volker! Just what I needed and he kindly taylored them for me.
Many thanks Volker!

[Vac11]

Hello Volker,

your inbox is full. I can not send you PM. Pleas clear it. Im interesting in some of your tube mic power transformers.

Thank you

Milan

[fsalter]

Same here..i would be interested. Please PM me.

[skeptic12]

Me too! I need 2 for N61 supplies if you are still making them

[rmburrow]

Single voltage (230 v) or dual voltage (115/230 v) primary?

tube microphone transformer

Started by Gus The Lab

Tube Mic Preamp Power Transformer and Phantom Power

Started by benlindell Drawing Board

Mic pre input transformer. Can it be reversed for microphone output transformer?

Started by kato Drawing Board

Tube microphone with ef80 tube and oep transformer.

Started by peterbach « 1 2 3 » Microphones