Hummingwire

500 Series passive eq - overchoice
« on: March 04, 2019, 05:13:56 AM »
Hi everyone!

I'm looking for a passive eq module for my 500 series rack, but don't really know which one to go for. I would like to build it myself, and so far have found a kit by Sound Skulptor (EQP501) and one by Analog Allstars (EQP-1S5).

Does any one of you have experience with one of those (or both)?
which one would you recommend?
or is there another option I haven't considered yet?

AA EQP-1S5: https://groupdiy.com/index.php?topic=46920.0
SS EQP501: http://www.soundskulptor.com/en/proddetail.php?prod=EQP501

Thanks in advance!


ChrioN

Re: 500 Series passive eq - overchoice
« Reply #1 on: March 06, 2019, 01:51:22 PM »
Hi Hummingwire,

Try gearslutz, they have a section in there forum where they ask these kinds of questions. You will get far more response at that place!
"All PCB traces are curved to emulate the electrical response of point-to-point wiring" -Drip

Blackdawg

Re: 500 Series passive eq - overchoice New
« Reply #2 on: April 15, 2019, 06:46:30 PM »
HIGHLY recommend the DIYRE EQP5 kit as well. Probably won't find a passive pultec style eq for cheaper and the kit is super easy to build. The PCB layout is ultra clean and easy to follow. Get the vintage output too!

Also JLM makes a kit too.
« Last Edit: April 15, 2019, 08:00:00 PM by Blackdawg »


 

Related Topics

  Subject / Started by Replies Last post
52 Replies
9855 Views
Last post February 09, 2013, 12:04:27 PM
by jplebre
6 Replies
1588 Views
Last post June 04, 2009, 03:29:03 PM
by pucho812
10 Replies
4213 Views
Last post May 08, 2010, 05:34:48 AM
by [silent:arts]
4 Replies
2573 Views
Last post February 07, 2012, 02:04:40 PM
by buildafriend