Rode nt1 MOD

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Exciting times in mic building world!

Marik from Samar audio is selling his super unique cardioid capsule from his "Omni" mic. Just ordered one without even thinking about it.

http://samaraudiodesign.com/capsule/
 
Hi all !
As I'm about to receive my capsule, I'm really really exited to be able to try it !

I have a question for you !
What kind of installation do you suggest ?

To remind you all, I have order a ck12 from Beesneez, and I'll install it in my nt1 for now, before I'll build myself a c12 :) (& replace it with a K67)

What do you suggest regarding installation ?

Should I wire only the front, & front backplate, or should I link the front backplate & the back backplate ?


 
Anybody has a small advice for me? :)

I'm sure someone already has use a c12 capsule in a schoeps design ! :) 
 
https://groupdiy.com/index.php?topic=61845

https://groupdiy.com/index.php?topic=61084

https://khronscave.blogspot.com/2017/05/cheap-chinese-bm800-microphone-modding.html (construction & schematic)

https://khronscave.blogspot.com/2017/10/16-bm800-modding-part-2-ck12-k47.html (some frequency sweeps)

I connected the two backplates together, and used that as the input to the JFET (and applying the bias to the diaphragms, so i could avoid using a DC-blocking cap).
 
Khron said:
https://groupdiy.com/index.php?topic=61845

https://groupdiy.com/index.php?topic=61084


🙏🏻 Thanks!!

https://khronscave.blogspot.com/2017/05/cheap-chinese-bm800-microphone-modding.html (construction & schematic)

https://khronscave.blogspot.com/2017/10/16-bm800-modding-part-2-ck12-k47.html (some frequency sweeps)

I connected the two backplates together, and used that as the input to the JFET (and applying the bias to the diaphragms, so i could avoid using a DC-blocking cap).
 

Latest posts

Back
Top