boji
Well-known member
So comon, iprovlek! Lets see some more pr0n in action!
Considering the mean turn length of about 4 inches and the total wire length of about 200 ft, a good enough precision can be attained by just looking at the coiled wire.CJ said:if you use a twist drill, you can time the amount of time the drill runs at the same speed (why not flat out?) to give you the same twists per inch,
https://groupdiy.com/index.php?topic=74165.msg938988extrepito said:Hi, I'm looking for information to build 2503 but the https://vacuumbrain.uk page is down. I guess this transformer is pretty straightforward, but I have some doubts. This will serve for the output of 554 Eq.
A greeting !
extrepito said:Hi, I'm looking for information to build 2503 but the https://vacuumbrain.uk page is down. I guess this transformer is pretty straightforward, but I have some doubts. This will serve for the output of 554 Eq.
A greeting !
iprovlek said:Yes that is company that doing wires from 1939!!!
I asked for this particularly wire 4 twisted 0.28mm gauge wire!!!
Isn't that cheap wire but it worth it! Especial when you doing lot of them...
I didn't made any input trannie but that is My next wish!!!
You have recipe for input for API on CJ site that I sent you!!!
I did API 1604 inspired 16 channels mixer, lots of job,time,money and endless soldering...
So need it lot of trannies....
iprovlek said:Hi Aleguitarpro!
I use 30m...for testing,but finished with buying Litz wire from PACK LITZ WIRE company!They have 0.28mm of
4 twisted wire!
Yes I use that lams from Edcor,you have on first site I told everything that I used...
It can be done about almost 20 pieces....
But next one batch of it I bought laminations from Italy!
Best
Ivan
Spencerleehorton said:I just wound a couple of versions of the 2503 onto a bigger bobbin and lams I think they are ei75 and had 4 bobbins of 0.25mm which I then wound onto bobbin then twisted onto another bobbin then put back on, 250 turns and hit 11ohms per wind with 130mh , they sound pretty good!
Twists don't need to be consistent, only so to make winding easier (no knots).Aleguitarpro said:I tried to use 4 wires twisting them but it's a lot of work and twists are not regular.
abbey road d enfer said:Twists don't need to be consistent, only so to make winding easier (no knots).
Enter your email address to join: