Siemens W289 XY/MS module

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nickuk99

New member
Joined
Sep 24, 2018
Messages
3
Hi,  Siemens W289 Can anyone tell me how to hook up this module into my stereo bus?

I have the German pinout.. but can anyone explain in practice how to integrate with this module into my stereo bus??  Also should it be before or after the summing stage?

I have the +/- 24v power rail already available.. need help with the audio connections  in and out etc..

Any help most appreciated :)

 

Attachments

  • Screenshot_20190419-095102.png
    Screenshot_20190419-095102.png
    1.3 MB · Views: 33
I don't know how you want to use it or what for.
But if you want to use it for MS processing of your stereo sum then you need another MS processor.
One for XY to MS and another one for MS back to XY.
That way you can send the MS signal of the first one to any eq, comp, etc. and the output to the second one to get XY again.
I can recommend the LAWO W989 as it has the same casette size, is high quality and easier to get than another W289.

 

Latest posts

Back
Top