How much do you pay for your PCB?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kkrafs

Well-known member
Joined
Mar 18, 2005
Messages
74
Location
Cambodja by morning
Im curious how much do you pay for your PCB's?

Lets say, in min units of 10, two layers, FR4
green mask and with or without component
print! Do you think you get a good deal?

Regards
kkrafs
 
if you need alot try getting in touch with Gustav, he's right next to you (denmark) and his boards are unbelivable.
only drawback is i think he is a higher qty. order guy.
 
Here's a useful link for comparing prices between the many PCB manufacturers out there: http://www.cadsoft.de/Boardhouses/

I'm about to send a board to these guys based on a recommendation. They price by amount of baords that can fit on one big sheet, instead of board quantity, so you can get a great deal depending on the individual size. If you're worried about having too many boards I would just write up a BOM & schematic and post the rest for sale in the Black Market. People always want something new to build, especially if there's a BOM and PCB for it.
 

Latest posts

Back
Top