Drip 670 ver 3 Center Tap Question
« on: July 23, 2018, 04:33:15 PM »
Hey guys-I don't know if anyone has built a Drip 670 ver 3 yet, but I am stuck on pretty much the last step here with the wiring.  I'm trying to figure out where to wire all the orange, center tap cables of the big Sowter Control Amp Transformers.  I know they're supposed to feed into the 440V line, but I'm not sure the best way to get them there, and I don't want to send 440V to some place it doesn't belong.  Thanks in advance.


Re: Drip 670 ver 3 Center Tap Question
« Reply #1 on: June 19, 2019, 03:13:52 PM »
I am building one and I agree that the Documentation on the PSU is crap. And the help from Drip is erm like the Documentation..
Only help is a video on vimeo and that's more like a introduction to the PSU.
At least I can help that you have to connect the HVCT from the Mains Transformer to the HVCT point on the PSU.
I grab the 440v for the Control Amp from the Top row of the PSU PCB.
but still I have some CT left and a bit worried what to do with them. If you watch the Video he say "you don't want to connect them".



Related Topics

  Subject / Started by Replies Last post
9 Replies
Last post June 29, 2004, 04:06:59 PM
by neilium
5 Replies
Last post March 21, 2006, 02:23:52 PM
by ChrioN
9 Replies
Last post April 09, 2008, 10:05:02 AM
by dale116dot7
3 Replies
Last post May 12, 2010, 01:31:36 PM
by sahib