In search of a flat/wide power toroid transformer

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JBorum

Member
Joined
Dec 6, 2018
Messages
5
Location
Los Angeles, CA
I searched the forums as best I could but didn't see anything:

I have a Carvin amp with a noisy power toroid I’d like to replace. This is what I’m looking for:

*** must fit in a 1-unit rack space enclosure ***
115/120V in
50V out
200VA capacity (roughly, based on the amp’s specs in watts, but in practice two near-field studio monitors probably don’t need that much power)

It’s not hard to find 50V toroids, but the height is a problem. This one is wide and flat. Most are somewhere around 48mm in height and I need something like 30 or 32mm.

Does anybody know where I could find a low profile toroid like this? The amp is old and not particularly valuable, so I'm not interested in a custom build.

Thanks,

Jeremy
 

Latest posts

Back
Top