Modifying a Soundtracs Solo Midi mixer
« on: July 14, 2018, 01:40:27 AM »
I've just managed to buy  Soundtracs Solo in pretty good condition given that it's a 25 year old mixing console.  It probably would benefit from a serious overall and it got me thinking. It has almost everything I'm looking for in terms of a way of tying together 24-track analogue tape and 24-track digital. Two things that would have been nice would be:

1.  Better channel monitoring (although I can get round this by having the tape machine near when using analogue, and having a digital meterbridge open when using digital).

2. Moving faders that output midi data as controller numbers.

I have a Mackie Ultramix system hooked up to the console which gives VCA automation via an old (1997) Mac/ Windows software.  It's a real fiddly affair to get the whole thing going as it consists of an old computer, a midi interface, a Mackie Ultrapilot control surface and the 19" rack unit / patchbay which houses the audio electronics of the VCA automation. It would be absolutely the dog's proverbials if I could get some moving faders like say the ones on a Yamaha 02R (as the units are cheap as chips) to replace the ones in the Solo. I realise I may just be dreaming with no real idea what's involved here but thought I would ask here for some thoughts on the idea?   

Re: Modifying a Soundtracs Solo Midi mixer
« Reply #1 on: September 30, 2019, 01:26:20 AM »
Hi, i got myself a Solo Midi a few months ago.

I am happy with it, and I also considered the moving faders but could not find a good solution. The few good systems out there were expensive and it just does not make sense the investment.

I have been recapping the board for reliability.
Did you find a sensible mod to apply / improve - specifically i would be interested in lowering the noise at master and group summing buses.


Re: Modifying a Soundtracs Solo Midi mixer
« Reply #2 on: September 30, 2019, 04:48:22 AM »
When you say better monitoring do you mean better metering.? The Solo Midi has PFL on every channel so you can hear and see any channel. Are you looking for a meter on every channel?



'The only people not making mistakes are the people doing nothing'


Related Topics

  Subject / Started by Replies Last post
9 Replies
Last post March 12, 2006, 05:33:10 PM
by fucanay
6 Replies
Last post October 24, 2010, 05:03:17 PM
by jsteiger
3 Replies
Last post November 30, 2010, 09:36:38 PM
by 3nity
24 Replies
Last post June 10, 2018, 06:24:03 PM
by substitute