snigglepit
Active member
- Joined
- Apr 24, 2012
- Messages
- 28
A local tech is racking some old mixer modules for me at the moment. He's using this off-the-shelf rack case as a starting point:
https://in.rsdelivers.com/product/metcase/m6219249/combimet-19in-rack-case2u88x483x265/7694867
The electrical work and the metalwork have been no problem so far, but there will be a need to add some controls to the front panel of the rack unit that aren't on the modules themselves, such as phantom power switches and output attenuators.
The question is how to label these controls on the panel. My tech has a labelling machine but thinks this will appear a bit cheap, and is on the hunt for a more professional-looking solution. (It wouldn't bother me for my own use, but I will need to sell a couple of these racks in order to cover my costs.)
Any ideas?
https://in.rsdelivers.com/product/metcase/m6219249/combimet-19in-rack-case2u88x483x265/7694867
The electrical work and the metalwork have been no problem so far, but there will be a need to add some controls to the front panel of the rack unit that aren't on the modules themselves, such as phantom power switches and output attenuators.
The question is how to label these controls on the panel. My tech has a labelling machine but thinks this will appear a bit cheap, and is on the hunt for a more professional-looking solution. (It wouldn't bother me for my own use, but I will need to sell a couple of these racks in order to cover my costs.)
Any ideas?
