G-Pultec bypassing filter section switch

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

iprovlek

Well-known member
Joined
Sep 6, 2010
Messages
765
Location
Zagreb,Croatia
Hi guys need help for my G-Pultec!!!

I wanna use toggle switch bypass instead rotary switch!!!

And if is possible ,how need to be toggle switch wired on PCB!?


Do I need DPDT or some other switch!?


Thx
 
Yes I recheck schematics again!

Everything is clear now!!!

I must use DPDT switch, 2,5 pins goes to A,B , others pins on switch are for filter bypassing or engage!!!

 

Latest posts

Back
Top