NEVE VR plasma meter

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rocinante

Well-known member
Joined
Jan 17, 2014
Messages
1,132
Location
Minnehopeless
So as I understand it the power supply for the meters is a 240v 50w unit. Is this something that could be built? There is also a controller board that interfaces it the VR console? I also understand that calibration for the meters is arduous and requires a manual. Any help would be appreciated.
 
Hello

What is the point? fixing a VR meter or building a plasma driver ?
Just a new supply ?
For sure plasma need HT...
Vishay PBG series I suppose ?

Best
Zam
 
zamproject said:
Hello

What is the point? fixing a VR meter or building a plasma driver ?
Just a new supply ?
For sure plasma need HT...
Vishay PBG series I suppose ?

Best
Zam

So customer bought the VR knowing the plasma meters PSU was missing as well as the 'control board' or 'controller'. I am actually building him something else (mon ctlr) but I figured I could ask around to see if there is something that could be done. We have a lead on a psu but then there is the control board issue.
Fwiw These channel are packed insanely tight.
 
I remember reading about him and his mods and recaps. At this point I really just want to make sure the plasma tubes are in good shape as the customer thinks that one of them might be leaking.
A very awesome and generous member here is hooking me up with some scans.
 
Back
Top