Word / Symbol choice

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

boji

Well-known member
Joined
Jan 6, 2010
Messages
2,375
Location
Maryland, USA
Hello,  I've been thinking about how to symbolize graphics for channel cards, Slot 2 insert. 
I figured I'd try and crowdsource a better idea.  :-[ ;)

All I could come up with is using a triangle to stand-in for A1. Or leave it blank to promote experimentation.

Here's what slot 2 buttons do:

Slot 2 (EQ/Comp) top right button pressed puts slot 2 directly after mic/line (top left button), and in front of A1, which drives fader.
(S1 > S2 > A1 > Fader)

Leaving S2 top button unpressed, but pressing bottom S2 button, puts Slot2 after Mic/Line but before A1, like an old api console.
(S1 > A1 > S2 > Fader)

To make matters more complicated, pressing both S2 top and S2 bottom removes A1 out of the chain.
(S1 > S2 > Fader)

Edit: Dropping A1 plus local bypass of S2 lets 'colorless' pre drive fader, aux, and pgm.
Maybe answering my own question wrt middle graphic...

Any input (seriously any) would be appreciated.  Something like the below picture is all I can think of at the moment. Thanks in advance for any ideas on it.

3CjAq7N.png




 

Latest posts

Back
Top