Studiogearlover
Well-known member
- Joined
- Mar 14, 2017
- Messages
- 176
rmburrow said:Show some more of the schematic...at least the output stages
Studiogearlover said:and the issue with this mixer amplifier output is that the level is very low as no transformer is connected to the output. I am thinking to add an octal Altec 15356A , very similar in the pinout configuration. Just odd that only one pin 7 is connected to the primary.. unless the pin 8 ground is the other primary to ground?
mjrippe said:If there is no output transformer installed, there should be jumpers in the octal socket to pass signal to the XLR. Or is there another output such as 1/4" or screw terminals?
Enter your email address to join: