LA2A project case

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TonyW

Active member
Joined
Feb 7, 2017
Messages
33
Location
US
I am thinking about fabricating the LA2A case, it would be close to the original design, but not painted, all aluminum. with the front panel hinge. There is a metal laser cutting company near me that can do this, but I have to create the cad file to give them first. I wouldn't have any lettering on the face, it would be blank.


 
Yes Analog Vibes makes a great chassis,  I plan on building a couple of these and using jenson transformers, , When I get one fabricated I will post pic's
 
Here is the paper version of the chassis, can't do 3d so I printed the two pieces  on paper.
Looks like everything is in line with the two pieces. Working on locating all the holes on the back of the chassis.
Then drawing the  face plate.
Won't be able to get it in to fabricate until mid January.
 

Attachments

  • la 11.09.33 AM.jpg
    la 11.09.33 AM.jpg
    43.2 KB · Views: 60
Ready to send to the sheet metal fabricator
 

Attachments

  • Screen Shot 2020-01-23 at 6.32.25 PM.png
    Screen Shot 2020-01-23 at 6.32.25 PM.png
    132.7 KB · Views: 35
Here is the latest, need to make a couple of corrections with the fabricator.
 

Attachments

  • IMG_1563.jpg
    IMG_1563.jpg
    1.8 MB · Views: 53
Back
Top