Welcome to Dan of Gorman winding machines

I had recently got in touch with Dan Gorman and he very obligingly gave me a copy of his instructions for the CNC coil winding controller , its a big help over the translated Chinese manual .
Ive just messaged Ethan to try and hurry through Dan's membership here .

Very cool, Tubetec. Would be interested in getting a copy if possible.

Glad to hear Dan’s joining up.

I think theres a bit of a log jam in signing up here at the moment, but I'll let Dan know whats going on .

I made up, as recomended by Dan , a template  step winding sheet , it has a space for each parameter ,so that makes it nice  and easy to keep a hard record of your windings/layers etc

I still havent been able to collect my cnc winder yet , but its safe and sound at least , should be able to get it later this week or next ,  along with lots of 'end of spool' Essex magnet wire .

And theres Dans manual ,

and the original translated manual ,

Thanks for this, Tubetec!