• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

[SOLD] - Stuffed PYE PCB, Power Trafo, Knobs

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jplebre

Well-known member
Joined
Nov 3, 2012
Messages
617
Literally been sitting on my shelf waiting for a case for 3-4 years... I'll never finish it.
I measure every cap and resistor before stuffing, and almost everything is done with quality parts.

Includes:
- 2 fully stuffed PCBs, excluding trafos and the T3 based oscillator card
(WIMA, panasocnic, nichion caps, mollex connectors, metal resistors that I hand checked for tolerance before stuffing in)
- 4x cut of multicore cable, great for the balanced wiring
- 4 neutrik xlr female
- 4 neutrik xlr male+
- 4x audio 10k pots (ALPHA)
- 1x power trafo triads magnetic vpt48-520
- 1x IEC plug
- 4 large black knobs
- 8 small black knobs
- 2x 535 CMOS in the static packaging
- a bunch of power switches, I guess I didn't decide which one I'd use yet
- 4 inductors (they are massive,  but maybe of use to someone)
- 2 smaller inductors
- 2 massive resistors for R38 (it has a smaller wattage one in there)
- some cable ties and glue platforms for the cable ties

I've added the cost of the PCBs, Trafo, knobs, rotary switches, trimmer pots and I got just under £230 so I'm asking for:
** £230 plus shipping, can ship anywhere. **

IMG_2329.jpeg

IMG_2330.jpeg

 
Bump as I've added asking price, picture, and details.
 
Already replied to corgan but I’m currently at NAMM but will get be back Tuesday afternoon/Wednesday :)
 
Back
Top