jplebre
Well-known member
- Joined
- Nov 3, 2012
- Messages
- 617
Alright, so I was adding up how much this cost me, and I stopped at £690.
All packaged up and ready to ship for £690 + shipping
- The microphone body is assembled BUT you should make a threaded hole on the chassis for the wire-wound resistor.
- PSU is half-assembled, missing the main trafo, 7 pin plug, wiring. The PCB is assembled until the point that it needs to be turned on to calibrate.
- MK47 Kit which cost over £350 shipped. Includes:
-- MK47 Body,
-- PCB, populated
-- BV08 custom ioaudio transformer
-- Shockmount
-- Nice wooden case
-- Beesnees K7 capsule (£185) already installed!
-- PSU case from Martin Zobel (€130)
-- Choke, fuse holder, Neutrik XLR, etc
pictures
The microphone side is finished, with the original DIY kit offered in this forum.
The PSU is half-finished, IIRC only the transformers and plugs left. I got a beautiful case for this PSU, and Zayance's PSU, etc.
Will entertain offers but serious offers only pls
All packaged up and ready to ship for £690 + shipping
- The microphone body is assembled BUT you should make a threaded hole on the chassis for the wire-wound resistor.
- PSU is half-assembled, missing the main trafo, 7 pin plug, wiring. The PCB is assembled until the point that it needs to be turned on to calibrate.
- MK47 Kit which cost over £350 shipped. Includes:
-- MK47 Body,
-- PCB, populated
-- BV08 custom ioaudio transformer
-- Shockmount
-- Nice wooden case
-- Beesnees K7 capsule (£185) already installed!
-- PSU case from Martin Zobel (€130)
-- Choke, fuse holder, Neutrik XLR, etc
pictures
The microphone side is finished, with the original DIY kit offered in this forum.
The PSU is half-finished, IIRC only the transformers and plugs left. I got a beautiful case for this PSU, and Zayance's PSU, etc.
Will entertain offers but serious offers only pls