Danny1107



jensenmann

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #1 on: February 06, 2020, 10:50:51 AM »
That looks very well done! Congrats and good luck with your sale.
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort

Danny1107

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #2 on: February 08, 2020, 02:25:21 PM »
Thank you very much,  jensenmann.

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #3 on: February 09, 2020, 09:23:33 AM »
Looks very good. Can you tell me what dimensions  are the boards for the channels itself? Just the stuffed audio boards, with two transformers on each? I might get this for another project I have in mind,... Thanks!

Danny1107

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #4 on: February 10, 2020, 04:17:29 AM »
Looks very good. Can you tell me what dimensions  are the boards for the channels itself? Just the stuffed audio boards, with two transformers on each? I might get this for another project I have in mind,... Thanks!


Board dimensions are: 240mm x 120mm

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #5 on: February 10, 2020, 08:36:06 AM »
Board dimensions are: 240mm x 120mm

Thank You!
If it is not too much pain, I would like to know the dimension from the bottom of the case to the highest part of the audio boards (including the standoffs on the bottom and transformers on the top board) Trying to figure out if the audio parts are going to fit were I would try to install this compressor.

Best!

Danny1107

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #6 on: February 11, 2020, 10:04:08 AM »
Thank You!
If it is not too much pain, I would like to know the dimension from the bottom of the case to the highest part of the audio boards (including the standoffs on the bottom and transformers on the top board) Trying to figure out if the audio parts are going to fit were I would try to install this compressor.

Best!

Sorry, but I don't open the case every day...

Danny1107

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #7 on: March 05, 2020, 10:35:05 AM »
Up!

Danny1107

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #8 on: March 11, 2020, 05:14:45 AM »
Price dropped!!!

tommytones

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #9 on: March 30, 2020, 04:22:19 PM »
Sent you a PM
ToM

He who asks is a fool for five minutes, but he who does not ask remains a fool forever.
Chinese Proverb


Danny1107

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #10 on: May 21, 2020, 12:33:37 PM »
Up!

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU
« Reply #11 on: May 31, 2020, 04:27:31 PM »
Most importantly; How does it sound? Did you compare it to the real one? 

Best!

Danny1107

Re: FS: Igor IJ Research 33609 Compressor/Limiter EU New
« Reply #12 on: June 02, 2020, 02:50:08 AM »
Most importantly; How does it sound? Did you compare it to the real one? 

Best!

Hi,

No I didn‘t compare it to an original unit, but on the build tread there are a few reports about that.
https://groupdiy.com/index.php?topic=26218.0

The unit sounds absolut fantastic I would say with the typical warm colored Neve sound I know from other Neve preamps and compressors.

Here are few reports about compares to the original unit:

https://groupdiy.com/index.php?topic=26218.400 (Reply 404)

https://groupdiy.com/index.php?topic=26218.800 (Reply 813)

https://groupdiy.com/index.php?topic=26218.880 (Reply 887)
Best regards
« Last Edit: June 04, 2020, 01:42:01 AM by Danny1107 »


 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1419 Views
Last post June 17, 2019, 06:29:17 PM
by mrscary
8 Replies
2192 Views
Last post March 27, 2019, 02:49:49 AM
by late
3 Replies
754 Views
Last post February 08, 2019, 09:16:47 PM
by Milliarto
8 Replies
1585 Views
Last post February 14, 2020, 09:07:50 AM
by weiss