Powering multiple JLM VU meter buffer boards

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fsharpminor

Active member
Joined
May 4, 2015
Messages
41
Hello,
I am building a meter bridge and have 10 meters (Weston 862's) and the meter buffers, I just need to figure out the best way to power them all. Currently there is no other source to tap into for power, this will be a standalone meter bridge for now.
Any tips on getting power to 12 buffer boards?

Thanks!
Adam
 
Somewhere on this site there was a picture of someone who did something exactly like this when restoring a Neve desk I think? You could just use a 12V SMPS?
 
Hello,
I am building a meter bridge and have 10 meters (Weston 862's) and the meter buffers, I just need to figure out the best way to power them all. Currently there is no other source to tap into for power, this will be a standalone meter bridge for now.
Any tips on getting power to 12 buffer boards?

Thanks!
Adam
Sounds interesting...
Any news on progress?

Best/
Tom
 
Back
Top