Heythar Faze! I've just been in the weeds making group logic interconnects and coding up the VU meter led's. Not so photo-interesting until complete.
Do you do the silk screen?
The first few I used a syringe and nail polish, but
I think I'll pay extra to have FPE backfill since I'm sending out for engraving.
Update: Cheap *** went the diy backfill route. Infill occasionally forms bubbles which requires a 2nd pass >.< Should have done UV paint or bit the $ bullet; not a good use of time.
Your getting very close.
Thanks for your support man! Kinda sort of close. Still need to code-up and make cables for mute/solo logic and buffers, fader faceplates, integrate monitor controller. Once it's actually passing mixes I ought to build some aux returns, as there's 6 empty backplane slots available, but I reeeely need to get back to making music first!
Edit: May need an additional PSU due to voltage drop. Tomorrow I'll install everything and see. Wish me a test that is smokeless and without incident!
October 13, 2006, 10:33:12 AM
