• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Microphone bodies [SOLD]

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RuudNL

Well-known member
Joined
Apr 26, 2009
Messages
3,106
Location
Haule / The Netherlands
For sale: two U87-ish looking microphone bodies.
Dual layer headbaskets, size ~ 195 x 46 mm.
Fits on most MXL stand adapters, or the well known cheap Chinese shockmounts.
Comes with capsule mount for medium size microphone capsule and an alternative mount for a standard 34 mm capsule.
Included is a 3-pin XLR insert, or (on request) a 7-pin XLR insert if you want to build a tube microphone.
55 Euro + Paypal + Shipping / pc.
 

Attachments

  • MicBody.jpg
    MicBody.jpg
    235.6 KB · Views: 123
Is there any place / option for pattern, pad and low cut switch with these bodies?
Could you post some pics from the inside?
 
The inside...
It might be possible to add a small PCB with mini tumbler switches to the base of the headbasket, but that would require some creativity!
 

Attachments

  • 1.JPG
    1.JPG
    196.5 KB · Views: 54
I don't have them for sale at the moment, but you should look for Switchcraft QG7M.
Mouser Germany has them in stock, not very cheap though...

https://nl.mouser.com/ProductDetail/Switchcraft/QG7M?qs=MW%252B0w7tSdpkU9Mt3dE8rdg==
 
Back
Top