Oversea

Tg12313 build
« on: May 08, 2020, 06:17:28 PM »
Hi,

Posted these on the wrong section previously, here we go again!

Looking into building a TG12413-ish compressor. Is there any PCB boards out there for such a thing or are they all gone by now? Id rather skip doing a point to point if i can.

Ive seen/found schematic, but would also like to get some feedback from someone who has built it.

Alao,  is there parts  that are hard to source (vu meters, etc)

Any info is appreciated!


Rob Flinn

Re: Tg12313 build
« Reply #1 on: May 08, 2020, 06:52:01 PM »
scroll down the list of threads in this area about 15 topics
regards Rob

Oversea

Re: Tg12313 build
« Reply #2 on: May 09, 2020, 04:45:12 AM »
scroll down the list of threads in this area about 15 topics

Hi Rob,

Thank you for the suggestion, however ive gone through most them on this forum and I havent found any clues to where you could get hold of a PCB or a front panel for example.

Does anyone know if they can be ordered somewhere?

Rob Flinn

Re: Tg12313 build
« Reply #3 on: May 09, 2020, 09:50:40 AM »
Hi Rob,

Thank you for the suggestion, however ive gone through most them on this forum and I havent found any clues to where you could get hold of a PCB or a front panel for example.

Does anyone know if they can be ordered somewhere?

PM fripholm re pcb.
regards Rob

Oversea

Re: Tg12313 build
« Reply #4 on: May 10, 2020, 10:30:48 AM »
PM fripholm re pcb.

Thank you for having patience with me and  pointing me in the right direction. I missed all the hints you gave me didnt I?!

Anyway,  thanks  :)

Rob Flinn

Re: Tg12313 build
« Reply #5 on: May 10, 2020, 01:14:50 PM »
Thank you for having patience with me and  pointing me in the right direction. I missed all the hints you gave me didnt I?!

Anyway,  thanks  :)

KInda !    Anyway you should be able to get some boards.   If not try asking if anyone has spares in the black market.
regards Rob

andow

Re: Tg12313 build
« Reply #6 on: May 10, 2020, 02:47:48 PM »
You'll have more luck searching for 'zener limiter'...  ;)

Ilya

Re: Tg12313 build New
« Reply #7 on: May 10, 2020, 06:47:31 PM »
[edited per moderator notice]
« Last Edit: May 11, 2020, 06:57:27 AM by Ilya »
PCBs, enclosures and build guides at www.rackneve.com

JohnRoberts

Re: Tg12313 build
« Reply #8 on: May 10, 2020, 08:02:27 PM »
for profit sales should be made in the white market...

JR
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

 

Related Topics

  Subject / Started by Replies Last post
158 Replies
56315 Views
Last post February 12, 2009, 10:32:26 PM
by bahrens
100 Replies
63396 Views
Last post April 29, 2008, 09:13:45 AM
by Moby
76 Replies
27353 Views
Last post November 03, 2010, 01:51:16 PM
by pH
73 Replies
34569 Views
Last post September 26, 2010, 01:51:30 PM
by SIXTYNINER