Tg12313 build

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Oversea

Member
Joined
Sep 3, 2009
Messages
8
Hi,

Posted these on the wrong section previously, here we go again!

Looking into building a TG12413-ish compressor. Is there any PCB boards out there for such a thing or are they all gone by now? Id rather skip doing a point to point if i can.

Ive seen/found schematic, but would also like to get some feedback from someone who has built it.

Alao,  is there parts  that are hard to source (vu meters, etc)

Any info is appreciated!
 
Rob Flinn said:
scroll down the list of threads in this area about 15 topics

Hi Rob,

Thank you for the suggestion, however ive gone through most them on this forum and I havent found any clues to where you could get hold of a PCB or a front panel for example.

Does anyone know if they can be ordered somewhere?
 
Rob Flinn said:
PM fripholm re pcb.

Thank you for having patience with me and  pointing me in the right direction. I missed all the hints you gave me didnt I?!

Anyway,  thanks  :)
 
Oversea said:
Thank you for having patience with me and  pointing me in the right direction. I missed all the hints you gave me didnt I?!

Anyway,  thanks  :)

KInda !    Anyway you should be able to get some boards.  If not try asking if anyone has spares in the black market.
 
Back
Top