Amek M2500 fader Vca

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ilfungo

Well-known member
Joined
Apr 25, 2009
Messages
1,460
Location
ITALY
Hi
My amek m2500 have some fader with a plastic element between binary broken....
Attached image.
I've tried to find them and also the entire fader, but out production and seems impossibile to find.
Could someone help me?
There is a new fader that can fit with no modificstion?
The original one are 1110 dn
Thanks
 

Attachments

  • 20200519_203657.jpg
    20200519_203657.jpg
    1.7 MB · Views: 29
Thanks jensenmann
I will try.
I have contacted P&G  in EU
Them told me it's out of production from many years, and the is no substitute with same dimension and spec.
Now I'm tryng to rebuilt it with 3d print....
I'm very near
 

Attachments

  • 20200601_000156.jpg
    20200601_000156.jpg
    1.3 MB · Views: 9
Hello

ilfungo said:
Them told me it's out of production from many years, and the is no substitute with same dimension and spec.

What is so specific with them ? Distance between fixing screw is not 110mm ?
VCA fader have linear taper.

Best
Zam
 
Hi Zam
Fixing screw are not 110 but 140
And there are 2 additional holes to Fix them to  main channel Pcb...
Best
 

Latest posts

Back
Top