Sredna

Re: Tannoy TM1 question
« Reply #20 on: May 27, 2020, 10:29:36 AM »
Behringer made a Rode “clone“?   :o
Hmm... in which direction do the electrons actually go?


Sredna

Re: Tannoy TM1 question
« Reply #21 on: May 27, 2020, 12:36:20 PM »
Hmm... in which direction do the electrons actually go?

Gus

Re: Tannoy TM1 question
« Reply #22 on: May 27, 2020, 04:15:55 PM »
Found this:

https://rmmedia.ru/threads/139684/

Thanks for the link
at least they cascoded the the 170s.

Google translate does not seem to work on the page.
EDIT translate worked if I copied the posts into translate it would not translate the web page
I am guessing there is another 47 ohm and 47uf going to pin 2. EDIT post had added 47 to pin 3

IIRC someone posted a Rode NT1 schematic in the past it would be interesting to compare.
edit found the link
https://groupdiy.com/index.php?topic=61032.0
« Last Edit: May 28, 2020, 09:20:22 AM by Gus »

Sredna

Re: Tannoy TM1 question
« Reply #23 on: May 29, 2020, 06:46:29 PM »

Google translate does not seem to work on the page.


Chrome does translate, for me at least...

Lots of (maybe usable) information in the comments.
Hmm... in which direction do the electrons actually go?


gyraf

Re: Tannoy TM1 question
« Reply #25 on: June 01, 2020, 07:51:57 AM »
Am I reading this right:

Quote
Operative part of the judgment

The Court:

1.
Dismisses the action;

2.
Orders Georg Neumann GmbH to pay the costs.

..that is, the trademark claim is void in the EU?

/Jakob E.
..note to self: don't let Harman run your company..

Gus

Re: Tannoy TM1 question
« Reply #26 on: June 01, 2020, 08:20:02 AM »
Jakob

It is not clear to me about the EU.  It does seem to read that way. You can find more with search.

I can't find what I think is the US trademark number with a search.

The TM1 would have been a good buy for the body if the grill matched the art work.

Gus

Tungstengruvsten

Re: Tannoy TM1 question
« Reply #27 on: June 01, 2020, 10:11:34 AM »
I was the NA tech support manager at TC Group/Tannoy for the last 8 years before Behringer destroyed the company - The TCG years were pretty good really for Tannoy - even though their big push was commercial audio (ceiling speakers were the bread and butter) they still manufactured all the big PA and higher-end home speakers in Scotland...

Then Behringer comes along and sh*t like this comes out - it was hilarious when they were trying to talk about Tannoy's 'microphone legacy' when this was released....I spent my last 4 months there creating/babysitting/following up on an issue for the TM1...the fact that the online photo was absolutely wrong.   In 4 months of working within the company I couldn't break through the hilariously bureaucratic company tiers to get it addressed.  Multiple meetings/emails/phone calls I brought it up lol....the disconnect is huge.  That was in 2015.   It's still on the website!



Is that a real poncho or a Sears poncho?

evil grill

Re: Tannoy TM1 question
« Reply #28 on: June 02, 2020, 09:55:36 AM »
Awesome picture!

RuudNL

Re: Tannoy TM1 question
« Reply #29 on: June 02, 2020, 11:18:06 AM »
Apart from the fact that she is singing to the wrong side of the microphone...

Awesome picture!
There is a solution for every problem!

http://www.vansteenisaudio.nl


evil grill

Re: Tannoy TM1 question
« Reply #30 on: June 04, 2020, 07:37:33 AM »
Apart from the fact that she is singing to the wrong side of the microphone...
That's what's so funny!

rogs

Re: Tannoy TM1 question
« Reply #31 on: June 04, 2020, 11:47:01 AM »
I reckon she was hired from the same advertising agency as this girl ... (currently nursing some very burnt fingers! )  :)

www.amx.jp137.com - A DIY RF condenser mic project

RuudNL

Re: Tannoy TM1 question
« Reply #32 on: June 04, 2020, 02:43:35 PM »
 ;D
There is a solution for every problem!

http://www.vansteenisaudio.nl

Re: Tannoy TM1 question
« Reply #33 on: June 04, 2020, 11:48:06 PM »
They are both forgiven, but here we have a pro with a mic on the pricey side. Make sure you see this on YT, lovely tile reverb, and lots ot it 🤣

https://youtu.be/cCNM706Iv8M
« Last Edit: June 04, 2020, 11:54:43 PM by kingkorg »

RuudNL

Re: Tannoy TM1 question
« Reply #34 on: June 05, 2020, 12:49:29 PM »
That is the same situation I saw on Dutch television: a singer singing to the back of a U47 FET!  ;D
There is a solution for every problem!

http://www.vansteenisaudio.nl

analogguru

Re: Tannoy TM1 question
« Reply #35 on: June 06, 2020, 04:15:51 AM »
That is the same situation I saw on Dutch television: a singer singing to the back of a U47 FET!  ;D
Yes, and ?  All of them have switched the microphone to omni, (only a few to "8")..... ;)
[That is the reason why you need omni-mode on the microphones for the rich]



RuudNL

Re: Tannoy TM1 question
« Reply #36 on: June 06, 2020, 06:18:17 AM »
The U47 FET doesn't do omni!
There is a solution for every problem!

http://www.vansteenisaudio.nl

gyraf

Re: Tannoy TM1 question
« Reply #37 on: June 06, 2020, 08:52:09 AM »
..ssh..!
..note to self: don't let Harman run your company..

Sredna

Re: Tannoy TM1 question
« Reply #38 on: June 06, 2020, 10:08:14 AM »
 ;)
Hmm... in which direction do the electrons actually go?

xeawr

Re: Tannoy TM1 question
« Reply #39 on: June 16, 2020, 10:25:36 AM »
I remember when I first saw that. I was like "what???". I should show that to my clients, it will give them  more confidence in my skills  ;D


 

Related Topics

  Subject / Started by Replies Last post
13 Replies
6343 Views
Last post March 21, 2007, 10:11:34 PM
by peters
41 Replies
16843 Views
Last post January 27, 2020, 11:25:31 AM
by ernesternest
5 Replies
3728 Views
Last post March 23, 2011, 12:17:53 PM
by Andy Jackson
5 Replies
3671 Views
Last post August 18, 2011, 06:25:50 AM
by nashkato