Tannoy TM1 question

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sredna said:
Found this:

https://rmmedia.ru/threads/139684/

Thanks for the link
at least they cascoded the the 170s.

Google translate does not seem to work on the page.
EDIT translate worked if I copied the posts into translate it would not translate the web page
I am guessing there is another 47 ohm and 47uf going to pin 2. EDIT post had added 47 to pin 3

IIRC someone posted a Rode NT1 schematic in the past it would be interesting to compare.
edit found the link
https://groupdiy.com/index.php?topic=61032.0
 
Jakob

It is not clear to me about the EU.  It does seem to read that way. You can find more with search.

I can't find what I think is the US trademark number with a search.

The TM1 would have been a good buy for the body if the grill matched the art work.

Gus
 
I was the NA tech support manager at TC Group/Tannoy for the last 8 years before Behringer destroyed the company - The TCG years were pretty good really for Tannoy - even though their big push was commercial audio (ceiling speakers were the bread and butter) they still manufactured all the big PA and higher-end home speakers in Scotland...

Then Behringer comes along and shit like this comes out - it was hilarious when they were trying to talk about Tannoy's 'microphone legacy' when this was released....I spent my last 4 months there creating/babysitting/following up on an issue for the TM1...the fact that the online photo was absolutely wrong.  In 4 months of working within the company I couldn't break through the hilariously bureaucratic company tiers to get it addressed.  Multiple meetings/emails/phone calls I brought it up lol....the disconnect is huge.  That was in 2015.  It's still on the website!

8797797351454.jpg


 
I reckon she was hired from the same advertising agency as this girl ... (currently nursing some very burnt fingers! )  :)

 

Attachments

  • solder girl2.jpg
    solder girl2.jpg
    87.7 KB · Views: 39
They are both forgiven, but here we have a pro with a mic on the pricey side. Make sure you see this on YT, lovely tile reverb, and lots ot it 🤣

https://youtu.be/cCNM706Iv8M
 

Attachments

  • 20200605_054630.jpg
    20200605_054630.jpg
    473.2 KB · Views: 37
RuudNL said:
That is the same situation I saw on Dutch television: a singer singing to the back of a U47 FET!  ;D
Yes, and ?  All of them have switched the microphone to omni, (only a few to "8")..... ;)
[That is the reason why you need omni-mode on the microphones for the rich]


 
I remember when I first saw that. I was like "what???". I should show that to my clients, it will give them  more confidence in my skills  ;D
 
Back
Top