RuudNL
Well-known member
I have a Telefunken M221 microphone with a defective transformer.
The problem is: how to get the old transformer out and the new transformer in...
The construction consists of a couple of plexiglass disks with the components (and the transformer) between them.
Unfortunately it is not possible to slide the transformer out sideways.
At the capsule side there are two screws, but whatever I tried, I couldn't remove them, or even turn them.
Are these very thin long screws that end at the connector side, or are there segments with both inner and outer thread that screw together?
The construction looks like: build once, service never... ;D
Any suggestions?
The problem is: how to get the old transformer out and the new transformer in...
The construction consists of a couple of plexiglass disks with the components (and the transformer) between them.
Unfortunately it is not possible to slide the transformer out sideways.
At the capsule side there are two screws, but whatever I tried, I couldn't remove them, or even turn them.
Are these very thin long screws that end at the connector side, or are there segments with both inner and outer thread that screw together?
The construction looks like: build once, service never... ;D
Any suggestions?