Help. Beesneez BV12 transformer to a D-U67
« on: June 23, 2020, 04:45:50 PM »
Reposting here because I don't really know who to turn to on this one:

I've had the Beesneez BV12 mis-wired to the D-U67 for months now. My caridoid seemed good, figure 8 was dull, and omni was weak and didn't have enough low end.

I now know it's because it was mis-wired. When I altered the wiring today to another configuration based on the t67 configuration (I think), Cardioid sounded even better, Figure 8 no longer was dull, and Omni is now dull but louder, and they all now contain a high-pitched transformer buzz.

The Beesneez BV12 doesn't have a datasheet and what I got from Ben doesn't really explain to me how to wire it to this circuit, at least not to a relative newb like me.

If there is anyone out there familiar with this circuit or transformer, please help me. I am so close.

I've attached a picture that has the drawing Ben sent me, and the circuit.

If you need any info from me, just tell me how to record the data and I've got it covered.


Thank you,
Ryan
« Last Edit: June 28, 2020, 06:47:52 PM by FarisElek »


Pusch3l

Re: Help. Beesneez BV12 transformer to a D-U67
« Reply #1 on: July 02, 2020, 12:32:13 PM »
I don't know the Transformer or the U67 build but I thought this one might help you to make things a little more clear. It's the build guide from the mic with the AMI T67 Transformer. Maybe you can adapt it from there  or someone chimes in.

http://www.vintagemicrophonepcbkit.com/D67B/D67B/D-67%20Build%20Guide.html

Greets


 

Related Topics

  Subject / Started by Replies Last post
1557 Replies
283204 Views
Last post July 01, 2020, 12:23:09 PM
by FarisElek
5 Replies
2159 Views
Last post September 21, 2018, 05:43:43 PM
by myers1st
18 Replies
2324 Views
Last post October 02, 2019, 01:36:29 PM
by IndietownRecording
10 Replies
301 Views
Last post June 27, 2020, 05:08:28 PM
by FarisElek