Pages: [1]

ruffrecords

Ultimate DIY - design your own chip?
« on: July 07, 2020, 04:30:30 AM »
Logged
www.customtubeconsoles.com
https://mark3vtm.blogspot.co.uk/
www.eztubemixer.blogspot.co.uk


'The only people not making mistakes are the people doing nothing'

JohnRoberts

Re: Ultimate DIY - design your own chip?
« Reply #1 on: July 07, 2020, 07:48:56 AM »
That sounds easy...  8)

JR
Logged
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

Rochey

Re: Ultimate DIY - design your own chip?
« Reply #2 on: July 07, 2020, 01:03:08 PM »

Maybe start with this!
https://youtu.be/zM4cd6dBplw

The eval kit comes with a bunch of IC's to program, and you can buy additional ones from digikey.

My next project with one will be with a TLC2933 PLL device from TI to make the configurable divider to get down to word clock etc.
Logged
Expat Audio Home: http://www.expataudio.com

ruffrecords

Re: Ultimate DIY - design your own chip?
« Reply #3 on: July 07, 2020, 06:00:28 PM »
FPGAs have also come on in leaps and bounds in recent years. Not too hard to make your own microprocessor using one.

Also useful for high speed digital audio processing. By old AKAI DPS24 has one.

Cheers

Ian
Logged
www.customtubeconsoles.com
https://mark3vtm.blogspot.co.uk/
www.eztubemixer.blogspot.co.uk


'The only people not making mistakes are the people doing nothing'
Pages: [1]
 

Related Topics

  Subject / Started by Replies Last post
17 Replies
4327 Views 		Last post May 24, 2006, 07:22:58 PM
by CJ
5 Replies
4609 Views 		Last post August 28, 2006, 04:25:44 PM
by Rochey
9 Replies
2462 Views 		Last post December 21, 2008, 05:02:36 PM
by Mbira
22 Replies
1376 Views 		Last post September 26, 2019, 07:32:36 PM
by john12ax7