[Ankurbaghel]

Hey Anyone know where to get your custom logo inside vu meter anyone done it before or know about it

Thanks in Advance folks

I'm looking to get 

[gyraf]

Depends on exactly what meter you have but

you can have it printed at factory, or you can print the whole scale out on good quality paper and glue it in

or make an adapter tray for a CD-printer and inkjet it on

for large quantities screen-print is by far the best

/Jakob E.

[JohnRoberts]

Hey Anyone know where to get your custom logo inside vu meter anyone done it before or know about it

Thanks in Advance folks

I'm looking to get

In production quantities you can get any scale you want behind the meter...

For onsey-twosey look for a DIY solution. I can imagine printing a new meter scale and carefully slipping it over the meter vane and securing with adhesive to the former backplate.  Of course the meter movement is delicate so be careful.


JR

[buildafriend]

In production quantities you can get any scale you want behind the meter...

For onsey-twosey look for a DIY solution. I can imagine printing a new meter scale and carefully slipping it over the meter vane and securing with adhesive to the dormer backplate.  Of course the meter movement is delicate so be careful.


JR

I’ve seen the latter work well

I made a logo

Started by radiance The Lab

Lab-logo ?!

Started by clintrubber The Lab

Red logo on black panel

Started by deveng Drawing Board

API logo trademark

Started by conleycd « 1 2 » Brewery