1176 psu advice

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1wildthing

Well-known member
Joined
Jan 27, 2021
Messages
64
Hi guys, I've decided to try to build an 1176 clone using the Gyraf's board. I'm collecting parts at the moment and I can't make a decision about the psu. I've seen many post on this forum talking about transformers but many suggested options are not available anymore.
I'm based in EU so 230VAC is concerned. Has someone recently built this baby and is willing to give me some advice about a suitable transformer? As I'm a noob I'm scared about making the wrong decision and then burn the house down  ;D
 
Maybe you should post this question in a relevant build thread if there is one?
Anyway, it looks like it calls for a 24vct 500ma transformer.
Many recommend using a toroidal type transformer so maybe search for that and post back if you find something....

Maybe Hairball Audio or any of the other sellers here ??
 
scott2000 said:
Maybe you should post this question in a relevant build thread if there is one?
Anyway, it looks like it calls for a 24vct 500ma transformer.
Many recommend using a toroidal type transformer so maybe search for that and post back if you find something....

Maybe Hairball Audio or any of the other sellers here ??
Thanks I'll post my question on a g1776 thread, and I'll take a look to Hairball site. Thanks!
 
Back
Top