Poor Man's EQP1A is ten years old

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ruffrecords

Well-known member
Joined
Nov 10, 2006
Messages
16,152
Location
Norfolk - UK
My first DIY design here on groupDIY, the Poor Man's Pultec EQP1A, is now ten years old and I still get requests for the PCBs.

To celebrate its tenth anniversary I have open sourced the PCBs. They are now available in the OpenSource PCBs folder of the DIY tab of my web site:

https://www.customtubeconsoles.com/diy

The later mid section had a couple of errors on the PCB layout so I will not be releasing that until I have fixed them.

Cheers

Ian
 
I love this EQ. I made a dual channel PM-EQP-2A that I sold to the audio production Studio at Washington State university in the US and they love it. I kept a single channel for my studio.
As one would expect bass and acoustic guitar shine with your EQ.
Along with my Neve and Helios EQ's it is a go-to.
 
Rocinante said:
I love this EQ. I made a dual channel PM-EQP-2A that I sold to the audio production Studio at Washington State university in the US and they love it. I kept a single channel for my studio.
As one would expect bass and acoustic guitar shine with your EQ.
Along with my Neve and Helios EQ's it is a go-to.
Thank you very much  for that wonderful endorsement. You made my day.

CXheers

Ian
 

Latest posts

Back
Top