JRE Productions
Well-known member
Just bought a used TLM49. Its very quiet and the sounds works for my voice.
I noticed when messing with the position of it on the stand, if I touch the body of the mic I get a bit of ground hum. The hum is extremely low in volume, but I can hear it. As soon as I let the body of the mic go, it disappears. No noise at any other time even with the gain cranked.
I did a quick check with my other condenser mics (AT 4047 and MXL 603s) and none of them behave the same, so I am assume the cable is good (although the AT4047 is transformer based and may be isolated).
Thoughts?
Joe
I noticed when messing with the position of it on the stand, if I touch the body of the mic I get a bit of ground hum. The hum is extremely low in volume, but I can hear it. As soon as I let the body of the mic go, it disappears. No noise at any other time even with the gain cranked.
I did a quick check with my other condenser mics (AT 4047 and MXL 603s) and none of them behave the same, so I am assume the cable is good (although the AT4047 is transformer based and may be isolated).
Thoughts?
Joe